Years of industry experience
New Acetate Frame Double Bridge Teenager Optical Frame






A school-age frame with hardware that tolerates being folded the wrong way.
Overview
This is a junior frame, and the sizing logic is different from an adult pair: the bridge is narrower, the temple is shorter, and the front is light enough that a child does not push it up every few minutes. The front is made in acetate, the lens specification is a lens with a blue-light filtering option, and the shape is chosen to appeal at school age rather than to look like a scaled-down adult frame. It is supplied for childrenswear brands, optical chains and school programmes.
The commercial case is straightforward: one tooling set, one colour standard and one packing specification, so a buyer can extend the range by adding colours rather than by adding moulds. The double bridge is the visual signature: two separate bars sit above the lenses, which is unusual at teenager sizing. The catalogue lists this model under five search terms: teenager optical frame, acetate frame double bridge, double bridge teenager, acetate frame and new acetate frame. They cover platform, fit and frame family, and all five resolve to model 20Q094A, so a request placed under any of them reaches the same tooling and the same specification sheet.
Key Features
The four points below are the ones buyers usually test on a sample: material behaviour, fit geometry, optical performance and the customisation boundary.
Front Material and Weight
Acetate is chosen for depth of colour: pigment sits in the material rather than on it, so a polished front keeps its tone where the temple rubs. The moulded grade used here holds a thicker brow and a bevel without the internal stress that shows up later as crazing around the hinges.
Bridge, Temple and Retention
Temple tips are rounded and the hinge is set with a light spring action, so the frame tolerates being pulled off one-handed. That single detail accounts for most of the breakage in junior eyewear.
Lens and Eye Comfort
Blue-light filtering is an option where the brief calls for screen use, and the lens is specified at order so the parent-facing claim matches what is actually fitted. No filtering claim is made unless the lens carries it.
Colour, Logo and Packing
Colour is matched to an approved swatch before production, and the logo is applied at a stage that suits the material: moulded in, pad-printed or laser-marked. The minimum order quantity is 300 pieces, which is the point at which a colour run becomes practical.
Product Showcase
Photographs below are the approved sample set for model 20Q094A: front, angle, temple detail and colour reference. They are the images used for buyer approval, so a reorder is matched against the same reference.
Specifications
Values below come from the product file for this model. Where a field is not fixed in the file, it is marked as confirmable rather than filled with a nominal figure.
| Model No. | 20Q094A |
|---|---|
| Category | Custom Teenager Anti-Blue Optical Glasses |
| Frame Material | Acetate, injection moulded |
| Lens | Blue-light lens option; confirmed at order |
| Colour | Yellow, blue and purple (product file) |
| Customization | Logo and colour customisation supported |
| MOQ | 300 pieces |
| Certification | CE, FDA |
| Indicative FOB | 4.5 USD per piece (indicative FOB) |
| Packing | Packing configuration confirmed at quotation stage |
OEM & ODM Customization
Customisation is handled at the tooling and sampling stage rather than at packing, because colour and geometry decisions made late are the ones that create a mismatch between the approved sample and the bulk. The list below is the working boundary for this model: anything inside it is quoted as a variant, anything outside it is quoted as a new development.
- Front colour matched to a Pantone or physical swatch before moulding, with a colour chip retained for the reorder.
- Bridge width and temple length offered in more than one junior size so a range can cover several age bands.
- Logo applied by moulding, pad printing or laser marking, depending on where the mark sits and how the material takes ink.
- Lens specified at order: tint, coating and, where the brief calls for it, blue-light filtering.
- Temple length and tip curvature adjusted at sampling so the frame fits the target market rather than the sample head.
- Packing configured to the buyer brief: polybag, pouch, case, carton count and barcode label.
Manufacturing & Quality Control
Production runs through four checkpoints, and each one can stop a batch. The sequence is the same for a trial order and for a repeat run, so a buyer who approves a sample knows which checks the bulk will pass through.
1. Incoming Material Inspection
Every incoming lot is checked for colour, hardness and dimensional consistency against the approved sample. Metal parts are checked for plating thickness at the wear points, and any magnetic components are pull-tested before the batch moves to assembly.
2. Moulding and Frame Assembly
Front and temple come off the tool, are trimmed, then matched as a pair. Hinge screws are set to a fixed torque and thread-locked, so the fold tension is the same on the first frame and the last.
3. Surface Finishing and Optical Check
Surfaces are polished and, where specified, coated. Each frame is checked for sink marks, colour step at the hinge and lens seat flatness, and a sample is measured against the approved geometry.
4. Packing and Pre-Shipment Sampling
Frames are packed to the agreed carton count with a colour and model label on each polybag. A pre-shipment sample is drawn from the finished cartons and checked against the approved sample before the carton is sealed.
The full inspection standard is described on the quality control page, and prototype lead times are set out under rapid prototyping.
Applications
Model 20Q094A is ordered by buyers in the following channels. The list is not exclusive, but it describes where the shape, price point and packing have already been placed.
- Childrenswear brands adding eyewear to an existing size range
- Optical chains building a junior section beside the adult wall
- School and clinic programmes supplying young wearers
- Gift distributors packaging a frame with a case and cloth
- Online sellers needing a size that parents can order by age
- Importers supplying markets where junior eyewear is undersupplied
For the wider assortment built on the same specification, see the anti-blue optical glasses range.
FAQ
What is the minimum order quantity for this model?
The product file records an MOQ of 300 pieces for this model, and that is the quantity a colour run is quoted against. Colour and logo customisation is quoted against the same quantity, so a trial order and a repeat order use one price ladder.
How long does sampling take, and what is needed to start?
Sampling starts once the target colour, logo position and lens specification are confirmed. A stock front can usually be shown from existing samples, while a new colour or a new logo needs a made-up sample. The exact sampling window is confirmed at quotation stage, together with the courier cost and the sample charge, which is credited against the bulk order.
Can the logo and packing be customised?
Yes. Logo support is recorded in the product file for this model, and the mark can be moulded in, pad printed or laser marked depending on the surface it sits on. Packing follows the approved carton configuration, and a buyer can specify polybag, pouch or case before the run is released. Artwork is checked on a proof before production, so a spelling or position error is caught before the tooling is touched.
Start Your Custom Order
Send the age range, the colour count and the packing format, and the quotation comes back against this junior frame. The anti-blue optical glasses range shows the other sizes built on the same bridge and temple standard. Model 20Q094A, MOQ 300 pieces, certification CE, FDA. Send the brief and the specification sheet comes back with sampling, packing and price breaks.
- *Name
- *Phone
- *Title
- *Content
Why Choose READSUN as Your Optical Frame Manufacturing Partner
New products annually
Countries Exported Products
International Leading Brands Collaborated
Customer Satisfaction
Testimonials
Trusted by Partners Around the World















Aviator
Cat-eye
Square
Oval
Rectangular
Round

