Home / All / Compliance & Sustainability / What lens safety standards apply to sunglasses: ANSI and FDA drop ball?
What lens safety standards apply to sunglasses: ANSI and FDA drop ball?
For the US market, sunglasses must pass the FDA 21 CFR 801.410 lens impact test (the "drop ball" test) — a mandatory requirement for all sunglass lenses — and are commonly also certified to ANSI Z80.3, the voluntary US performance standard covering optical power, prismatic deviation and transmittance categories. READSUN builds both into standard sun lens QC.



US and EU Standards Compared
| Standard | Status in market | What it covers |
|---|---|---|
| FDA 21 CFR 801.410 | Mandatory, US | Drop ball impact test: a 5/8-inch steel ball dropped on each lens from 50 inches must not fracture it |
| ANSI Z80.3 | Voluntary, US | Refractive power, prismatic deviation, transmittance categories and UV limits |
| EN ISO 12312-1 | Mandatory, EU | Category 0-4 transmittance, UV limits, robustness (not drop ball) |
How the Drop Ball Test Works
- Mounting: the lens is clamped securely in a holder with the convex side facing up.
- Drop: a 5/8-inch (16 mm) steel ball is released from a 50-inch (127 cm) height onto the lens center.
- Pass criteria: the lens must not crack, chip or shatter through its full thickness.
- Documentation: test results support the FDA release statement that ships with US-bound sunglasses.
Scope note: drop ball applies to all sun lenses including fashion tints; FDA 510(k) clearance is a separate requirement that applies only to prescription lenses. For EU shipments you need EN ISO 12312-1 and CE instead — see our CE certification guide.
Shipping sunglasses to the US? Confirm FDA drop ball and ANSI Z80.3 coverage with READSUN.

Aviator
Cat-eye
Square
Oval
Rectangular
Round

