Aviator
Cat-eye
Square
Oval
Rectangular
Round
Years of industry experience
Designed to Reflect You
Global Eyewear Brands’ First Choice in Manufacturing
Home / All / Custom Sunglasses / Custom Men Sunglasses / Custom Rectangular Black Acetate Sunglasses | Wholesale Acetate Sunglasses Frames
Custom Rectangular Black Acetate Sunglasses | Wholesale Acetate Sunglasses Frames
Detail Information
A rectangular acetate sunglass frame with a UV400 tinted lens lenses, hand-polished and built for a men and women fashion collection.
Overview
SA214007 is a rectangular sunglass frame cut from black acetate sheet sheet and finished by hand. Acetate is not injected: the front is milled from a block, tumbled for hours, then polished on a wheel, which is why the colour has depth rather than sitting on the surface. Black acetate is polished to a high gloss, and the gloss is what shows a scratch, so this colour goes through an extra inspection pass before packing. The result is a frame with a heavier, more deliberate feel than a moulded plastic equivalent, and a lustre that survives daily wear.
integrated nose pads and reinforced optical hinges The lens is a UV400 tinted lens, cut to the rim profile and mounted without a gap. Nose pads are integrated into the front on this model, so there is no separate pad arm to bend out of shape, and the fit stays consistent across a production run.
The frame is supplied for wholesale and OEM programmes with MOQ: 1200 pcs/model. The nose pads are milled into the front rather than added as separate arms, which keeps the silhouette minimal and removes a part that can bend. Colours can be matched to a reference chip, and the metal detail, lens tint and temple core can all be specified per market. Cut as Custom Rectangular acetate, the Rectangular Black front is milled and hand polished, and the Black Acetate Sunglasses finish is what gives the frame its depth; the Acetate Sunglasses Frames range and the Wholesale Acetate programme share the same tooling.
Key Features
Hand-Polished Acetate
Acetate sheet is milled, not moulded, so the frame can carry layered and translucent colourways that injection plastic cannot reproduce. After milling, the frame is tumbled in wood chips and polished on a cotton wheel, which closes the surface and gives the deep gloss associated with premium eyewear. The process is slower, and the difference is visible in the hand.
Metal Detail and Hinge
Construction detail: integrated nose pads and reinforced optical hinges. The hinge is a metal barrel seated into a milled pocket, reinforced with a rivet where the temple meets the front, so the fold stays tight after repeated use. Decorative metal pins are inserted after polishing and locked in place, giving a clean line without visible adhesive.
Lens and UV Performance
The lens is a UV400 tinted lens, cut and edged to the rim and checked for centration before mounting. UV400 protection is verified on a transmission meter as part of final inspection, and the lens is seated with even compression so it does not craze at the edge. Tints, gradients and mirror coatings are available on request.
Fit and Finish Options
Front width, bridge and temple length are set for the men and women fit, with a slight pantoscopic tilt so the frame sits correctly on the cheek. Temple tips can be laser-marked, and the inside of the temple carries the model and size. Custom colourways are matched from a chip or a physical sample.
Product Showcase
The photographs below show SA214007 from the front, in three-quarter view and at the temple, where the hinge, the metal detail and the polished edge are visible. Colour depth in acetate only reads under raking light, so the side views are the ones to study. Black acetate is polished to a high gloss, so this colour gets an extra inspection pass before packing.
Specifications
| Model No. | SA214007 |
|---|---|
| Category | Custom Men Sunglasses |
| Frame Material | Acetate |
| Lens | a UV400 tinted lens |
| Size | Customizable on request |
| Color | black |
| Customization | OEM / ODM, logo, colour, size and packaging |
| MOQ | 1200 pcs/model |
| Certification | Confirmed at quotation stage |
Acetate is a sheet material, so colour and thickness are fixed per colourway and quoted with the order. Lens specification, metal detail and temple length that are not listed above are confirmed at quotation stage.
OEM & ODM Customization
Customisation on an acetate frame goes further than colour. The front can be milled to a new profile from a drawing, the temple core can carry a pattern, the metal pins can change position, and the lens can be specified by tint, gradient or mirror. Send the reference and the artwork, and we return a specification sheet plus a colour chip before the sheet is cut. Our OEM and ODM optical frames page describes the process.
- Colour matched to Pantone, RAL or a physical chip, with a moulded or plated dip approved before bulk.
- Logo by pad print, laser engraving or a fixed metal plate, positioned on the temple or the lens corner.
- Lens pairing in clear demo, blue-light filter, polarized, photochromic or tinted versions, cut to the frame groove.
- Size grading across two or three age bands, or width options for adult fits, from one mould family.
- Retail packaging: polybag, microfibre pouch, hard case, printed sleeve, barcode and price labelling.
- Artwork and dieline review before mass production, so the frame and the pack are approved in one round.
Sampling and tooling questions are normally settled in one round when the drawing and the colour reference arrive together; the rapid prototyping page explains how a drawing becomes a wearable sample.
Manufacturing & Quality Control
Acetate hides nothing: a flaw inside the sheet appears after polishing, and a hinge seated a fraction off shows as a gap at the brow. The four checks below are sequenced so those faults are caught while the frame can still be corrected.
1. Sheet and Component Inspection
Acetate sheet is checked for colour consistency, internal bubbles and thickness before cutting, since a void inside the block only appears after polishing. Hinges, rivets, metal pins and lenses are inspected for dimension and coating quality, and sheet lots are tagged so a colour complaint can be traced to a batch.
2. Milling, Tumbling and Assembly
Fronts are milled on CNC centres from the approved drawing, then tumbled to remove tool marks before polishing. Hinges are seated and riveted, temples are fitted, and the frame is closed to check the fold angle and the gap at the brow. Dimensional checks cover lens width, bridge and temple length.
3. Polishing and Lens Mounting
Polishing is done in stages, with the frame cleaned between wheels to avoid carrying grit into the surface. Lenses are mounted after polishing, checked for centration and edge gap, then measured on a UV transmission meter. Frames are inspected under daylight-balanced light for scratches, haze and colour drift between front and temples.
4. Packing and Batch Audit
Each frame is sleeved, cased and counted against the order breakdown, with the lens specification confirmed on the label. Sampling covers hinge cycles, lens seating, logo position and carton marking. A retained frame from each colour is archived so repeat orders can be matched against the original.
Applications
- Fashion sunglass brands building a seasonal acetate story.
- Optical boutiques that sell sun as an accessory alongside prescription.
- Duty-free and travel retail buyers wanting a high perceived-value frame.
- Online retailers with a design-led, mid-to-premium assortment.
- Distributors supplying concept stores and department counters.
- Private label programmes needing a distinctive silhouette.
Acetate rewards buyers who plan colour ahead: sheet is ordered per colourway, so the palette is usually locked with the purchase order rather than after it. The nose pads are milled into the front rather than added as separate arms, which keeps the silhouette minimal and removes a part that can bend.
The rest of the acetate and metal sun range is in the men's sunglasses collection. Buyers planning a seasonal story usually lock the palette with the purchase order, because sheet is ordered per colour rather than per unit.
FAQ
What is the MOQ and can colours be mixed?
MOQ is 1200 pcs/model. Colours can be mixed within the order, but sheet is purchased per colour, so each colourway needs to meet its own minimum. The palette is normally confirmed with the purchase order so the material can be booked against the production slot.
Can we specify the lens tint and coating?
Yes. Solid tints, gradients, mirror coatings and polarized options are available, and UV400 performance is verified on a transmission meter before packing. The lens specification is confirmed at quotation because it drives both cost and the labelling required in the destination market.
How is the frame branded?
Temple marking by laser or hot stamp, metal logo plates, and engraved core wires are all possible. Because acetate is polished after milling, branding is applied at a defined stage in the process, and the artwork is approved before that stage begins.
Anything not covered here, including lens specifications for a particular market, is answered within one working day through the contact page.
Start Your Custom Order
Send the silhouette reference, the colour chip and the lens specification, and we will quote SA214007 with sheet lead time, sample timing and packing options. Metal details and temple cores can be quoted in the same response so the frame arrives as one specification.
Related Products
Build Your Private Label Eyewear Collection
- *Name
- *Phone
- *Title
- *Content
Why Choose READSUN as Your Optical Frame Manufacturing Partner
New products annually
Countries Exported Products
International Leading Brands Collaborated
Customer Satisfaction
Testimonials
Trusted by Partners Around the World
Products
Ability
