Years of industry experience
Colorful Wood reading glasses for men women Support customization




A rectangular reading glasses frame with a clear acrylic reading lens, designed for men and women and supplied as a private label programme.
Overview
14R039P is a rectangular reading frame for men and women, built around a wood-veneer front over a PC core with a spring hinge. The front is a PC moulding wrapped in a wood veneer, so the frame carries the grain and warmth of wood without the dimensional movement that a solid timber front would show in a humid market. The frame is moulded in a PC and wood combination, which keeps the weight low enough to wear on the nose for an hour of reading without leaving a mark, while the hinge and temple keep enough stiffness to stay put when the head moves.
Optical performance is the point of a reader, so the lens is treated as part of the product rather than an accessory. Powers run across the range confirmed at quotation, each lens is checked for centration and power tolerance, and the reading zone is positioned to suit the frame's pantoscopic angle. a clear acrylic reading lens is fitted as standard, and other coatings can be specified.
The programme is aimed at buyers who reorder: MOQ: 1200 pcs per model, a fixed colour card, and packaging that can carry a retail barcode. Power runs from +1.00 upward in the steps agreed at quotation, and three colours with six powers are the usual starting mix for a first order. The range is listed for men women buyers as one unisex programme, and every colorful wood reading glasses order can support customization of colour, logo and power mix; the colorful wood finish is what holds it together.
Key Features
Frame Structure
The front is moulded in a PC and wood combination with an even wall section, so the lens groove stays concentric and the frame does not distort after glazing. a wood-veneer front over a PC core with a spring hinge The hinge is a metal assembly rather than a living hinge, because a reader is folded and unfolded many times a day and a plastic hinge is the first part to fail.
Lens and Coating
Lenses are supplied to the power range agreed at quotation, with power tolerance checked on a lens meter before mounting. a clear acrylic reading lens is the standard build; anti-reflective, blue-light filter and tinted options are available. Each lens is checked for centration so the reading zone sits where the eye actually looks.
Comfort for Long Reading
Bridge width and pad geometry are set so the frame rests on the sides of the nose rather than the top, which is what causes red marks after twenty minutes. Temple length is matched to the head size, and the temple tip is rounded so it does not press behind the ear when the wearer leans forward over a book.
Private Label Programme
Colour, logo, power assortment and packaging are specified together, which is what makes a reader range work at retail: a consistent card, a consistent case and a barcode that scans. Logos go on the temple or the case, and the dieline is reviewed before printing.
Product Showcase
The photographs below show this colorful wood reading glasses model from the front, in three-quarter view and folded, which is how a reader is actually carried. The wood veneer is the variable here, so each colourway is approved from a physical sample rather than a photograph.



Specifications
| Model No. | 14R039P |
|---|---|
| Category | Custom Unisex Reading glasses |
| Frame Material | a PC and wood combination |
| Lens | a clear acrylic reading lens |
| Size | Customizable on request |
| Color | any colour and logo available |
| Customization | OEM / ODM, logo, colour, size and packaging |
| MOQ | 1200 pcs per model |
| Certification | CE,FDA |
| Production Lead Time | 40 to 60 days after order confirmation |
| Payment Terms | T/T, 30% deposit and 70% balance before shipment |
Three colours and six powers are the typical starting breakdown, and the wood veneer is approved from a physical sample before bulk. Port of loading is Shanghai or Ningbo; anything not listed in the table is confirmed at quotation stage.
OEM & ODM Customization
Colour and logo are both open on this model, which is unusual for a wood-veneer frame: the veneer can be stained to a reference, and the logo goes on the temple or the case. Send the colour chip and the power spread, and we return a specification sheet with veneer samples before the order is confirmed. The OEM and ODM optical frames page covers the wider service.
- Colour matched to Pantone, RAL or a physical chip, with a moulded or plated dip approved before bulk.
- Logo by pad print, laser engraving or a fixed metal plate, positioned on the temple or the lens corner.
- Lens pairing in clear demo, blue-light filter, polarized, photochromic or tinted versions, cut to the frame groove.
- Size grading across two or three age bands, or width options for adult fits, from one mould family.
- Retail packaging: polybag, microfibre pouch, hard case, printed sleeve, barcode and price labelling.
- Artwork and dieline review before mass production, so the frame and the pack are approved in one round.
Sampling and tooling questions are normally settled in one round when the drawing and the colour reference arrive together; the rapid prototyping page explains how a drawing becomes a wearable sample.
Manufacturing & Quality Control
A reader is sold on magnification, so the lens meter is the centre of inspection rather than the last step. Four checks follow, and a lens lot outside tolerance is rejected instead of sorted, because a mixed batch creates counter complaints.
1. Frame and Lens Incoming Check
Frames are checked for colour, dimension and hinge function at goods-in, and lenses are verified for power and centration on a lens meter. Because a reader is sold on its magnification, a lens lot outside tolerance is rejected rather than sorted, since a mixed batch creates retail complaints.
2. Assembly and Hinge Cycling
Lenses are mounted into the groove with even compression, then the frame is closed and opened repeatedly on a cycling jig to confirm hinge life. Temple alignment and fold angle are checked, and any frame with a loose hinge is reworked before it reaches packing.
3. Optical and Surface Inspection
Each pair is checked on a lens meter for power, on a flat block for level sit, and under daylight-balanced light for scratches, bubbles and coating defects. The reading zone position is confirmed against the approved sample so the wearer's gaze lands correctly.
4. Packing and Retail Readiness
Pairs are packed with the case, cloth and sleeve specified for the programme, then labelled with power and barcode. Sampling covers power mix, label accuracy and carton count. A retained pair from each power is archived so a reorder can be matched.
Applications
- Optical retailers building a private label reader wall.
- Pharmacy and grocery chains selling readers at the counter.
- Online stores shipping single pairs with a power guide.
- Gift and promotional programmes with a low unit cost.
- Distributors supplying bookshops and stationery chains.
- Travel retail buyers wanting a compact, light product.
Power assortment is the main commercial decision: the mix should follow the destination market's age profile rather than a generic spread. Power runs from +1.00 upward in the steps agreed at quotation, and three colours with six powers are the usual starting mix for a first order.
The reading range, including clip-on and sun reader variants, is grouped in the reading glasses collection. Power assortment is the main commercial decision, and it should follow the destination market rather than a generic spread.
FAQ
What is the MOQ and how are powers mixed?
MOQ is 1200 pcs per model. Powers can be mixed within the order according to the assortment agreed at quotation, which is usually set from the buyer's own sell-through data rather than a standard spread.
What is the sample lead time?
Sampling starts once the frame colour, power and packaging are confirmed. Lead time is stated on the quotation because a new colour match or a printed case adds a stage. Courier transit is quoted separately.
Can we sell under our own brand?
Yes. Temple or case branding, a printed sleeve, a custom power sticker and your own barcode are all part of the programme. The dieline and artwork are approved before printing so the pack and the frame are consistent.
Anything not covered here, including lens specifications for a particular market, is answered within one working day through the contact page.
Start Your Custom Order
Send the colour reference, the power spread and the quantity, and we will quote this model with veneer samples, delivery timing and packing options. Payment is by T/T with a 30% deposit and the balance before shipment, and loading is from Shanghai or Ningbo.
- *Name
- *Phone
- *Title
- *Content
Why Choose READSUN as Your Optical Frame Manufacturing Partner
New products annually
Countries Exported Products
International Leading Brands Collaborated
Customer Satisfaction
Testimonials
Trusted by Partners Around the World















Aviator
Cat-eye
Square
Oval
Rectangular
Round





