Years of industry experience
Wholesale high grade elegant TR90 eyewear glasses spectacle frame for men






A rectangular TR90 frame for men, built on a single adult mould with a metal core inside the TR90 arm and a prescription-ready rim.
Overview
OTR254051 is a rectangular optical frame for men, moulded in TR90 on a single adult tool. The front is kept slim at the rim so a glazed lens seats deep in the groove without a visible edge, while the temple is built with a metal core inside the TR90 arm. The frame leaves the line light enough for all-day wear yet stiff enough to hold alignment after being folded and unfolded through a working week.
The geometry follows the measured size rather than a generic adult average: lens width, bridge and temple length are held to the drawing, which is why the same model can be sold in several markets without a fit complaint. The 50-15-145 geometry is the reason this frame sells across markets: a 50 mm lens with a 15 mm bridge and a 145 mm temple sits in the middle of the adult male range, so most buyers can stock one size and fit it without a second variant. Buyers usually run this frame as a core men's SKU and build the colour card around it, because one mould covers matte, crystal and two-tone finishes without new tooling.
Supply is organised for B2B: MOQ: Confirmed at quotation stage, sampling from approved artwork, and a production slot booked against your colour and size breakdown. TR90 allows a slim temple without the brittleness of acetate, which is why the frame holds its shape in a pocket and still closes flat after months of use. Sold as wholesale high grade stock, this tr90 eyewear glasses model is a spectacle frame built on a 50-15-145 geometry, and the same eyewear glasses platform supplies a spectacle frame for men in matte, crystal and two-tone finishes.
Key Features
TR90 Front and Temples
TR90 is a memory nylon rather than ordinary injection plastic. It flexes under load and returns to shape, so a frame pushed into a jacket pocket recovers instead of cracking. Colour is carried through the wall thickness rather than painted on, which keeps the finish consistent after polishing and avoids the stress whitening that shows on a painted temple.
Adult Fit and Balance
The front is balanced so the weight sits on the nose pads and the temple tips rather than on the bridge. That is what keeps a frame comfortable through a long day at a desk, and it is why the pantoscopic angle is set from the drawing instead of being fixed by the hinge geometry.
Prescription-Ready Rim
The rim groove accepts standard ophthalmic lenses across the usual index range, and the front holds enough material at the screw points to keep its shape after glazing. Labs can edge and mount without modifying the frame. a clear demo lens is fitted as the demo lens, so the frame arrives ready for glazing or for sale as a fashion style.
Colour and Branding
Because colour is moulded, a buyer can run a full palette from one SKU: matte black, crystal, tortoise and two-tone all use the same tool. Logos are applied by pad printing or laser engraving on the temple, and the frame can be packed in a polybag, a pouch or a printed hard case with your own barcode label.
Product Showcase
The photographs below show OTR254051 from the front, in three-quarter view and at the temple and hinge, which is where an adult frame is judged: rim depth, hinge seating and the balance of the front. The 50-15-145 geometry is printed on the temple, so a buyer can confirm the size without measuring.







Specifications
| Model No. | OTR254051 |
|---|---|
| Category | Custom Men Optical Frame |
| Frame Material | TR90 |
| Lens | a clear demo lens |
| Size | 50-15-145 |
| Color | matte, crystal and two-tone finishes |
| Customization | OEM / ODM, logo, colour, size and packaging |
| MOQ | Confirmed at quotation stage |
| Certification | Confirmed at quotation stage |
Dimensions are held to the approved sample rather than to a nominal drawing, so a repeat order arrives at the same temple length and bridge width. Anything not listed in the table, including lens power and packaging format, is confirmed at quotation stage.
OEM & ODM Customization
Customisation runs through one contact from drawing to shipment. Send a reference sample, a technical drawing or a colour chip, and we return a specification sheet covering material, dimensions, logo position, lens type and packaging before tooling is committed. Because the model sits on a single adult mould, a new colourway or a logo change needs no new tool, which keeps development inside a normal buying cycle. The full service scope is set out in our OEM and ODM optical frames overview.
- Colour matched to Pantone, RAL or a physical chip, with a moulded or plated dip approved before bulk.
- Logo by pad print, laser engraving or a fixed metal plate, positioned on the temple or the lens corner.
- Lens pairing in clear demo, blue-light filter, polarized, photochromic or tinted versions, cut to the frame groove.
- Size grading across two or three age bands, or width options for adult fits, from one mould family.
- Retail packaging: polybag, microfibre pouch, hard case, printed sleeve, barcode and price labelling.
- Artwork and dieline review before mass production, so the frame and the pack are approved in one round.
Sampling and tooling questions are normally settled in one round when the drawing and the colour reference arrive together; the rapid prototyping page explains how a drawing becomes a wearable sample.
Manufacturing & Quality Control
Inspection happens at four points, and each point has a defined reject action rather than a note to sort later. The sequence below applies to every frame we ship, and the inspection record travels with the order so a buyer can match a carton to a batch.
1. Incoming Material Inspection
TR90 pellets are checked against the approved batch for colour, melt flow and dryness before the hopper is loaded. Hinges, screws and temple cores are sampled for dimension and plating adhesion, and any lot that fails the gauge check is quarantined rather than pushed into production.
2. Moulding and Assembly
Fronts and temples are moulded with the cycle parameters locked to the approved sample. After trimming, the hinge is seated and the temple is cycled to confirm tension. Frames showing sink marks, weld lines or short shots are pulled at the press rather than at final inspection.
3. Surface Finishing and Dimensional Check
Polishing is done by tumbling and hand touch-up, then every frame is checked on a flat surface for rock and against a profile gauge at the bridge and the rim. Temples must fold to a matched angle, and the printed size must match the measured geometry.
4. Packing and Final Sampling
Finished frames are counted against the order breakdown, bagged and packed with the accessory set agreed at quotation. AQL sampling covers appearance, hinge cycles, logo position and label accuracy. A retained sample from each batch is archived for traceability.
Applications
- Men's optical collections needing a lightweight core frame.
- Optical chains that reorder the same model across seasons.
- Independent opticians building a small, tidy men's assortment.
- Private label programmes launching a first metal-free range.
- Online eyewear brands selling by measured frame width.
- Duty-free and travel retail buyers wanting a packable frame.
Because the frame is normally glazed in the destination market, it suits buyers who keep lens inventory local and stock only the front and temple. TR90 allows a slim temple without the brittleness of acetate, which is why the frame holds its shape in a pocket and still closes flat after months of use.
The wider men's assortment, including metal and acetate models, sits in the men's optical frame collection on this site. Buyers who need a second colour or a size variant normally add it to the same purchase order, because the mould is already running.
FAQ
What is the minimum order quantity?
The MOQ is Confirmed at quotation stage. It can be split across colours as long as each colour meets the per-colour minimum agreed at quotation, so a buyer can test three or four shades in one production run.
How long does a sample take?
Sampling runs from the approved artwork or the stock colour card. We need the model reference, the colour reference and the logo file; lens type is confirmed at the same time. Sample timing is quoted with the offer, and courier transit is separate.
Can we brand the frame and use our own packaging?
Yes. Pad printing suits multi-colour marks, laser engraving gives a wear-resistant tonal finish, and packaging can be a stock pouch or a printed case with your dieline. Artwork is reviewed before mass production.
Anything not covered here, including lens specifications for a particular market, is answered within one working day through the contact page. OEM orders are confirmed item by item before production, and every batch is checked against the approved sample.
Start Your Custom Order
OTR254051 is quoted per colour and size against your breakdown, with samples dispatched from the current tooling. Send the target quantity, the colour reference and the logo file, and we will return a specification sheet, sample timing and packing options for review. Lens pairing can be quoted at the same time so the frame and the lens arrive as one deliverable.
- *Name
- *Phone
- *Title
- *Content
Why Choose READSUN as Your Optical Frame Manufacturing Partner
New products annually
Countries Exported Products
International Leading Brands Collaborated
Customer Satisfaction
Testimonials
Trusted by Partners Around the World















Aviator
Cat-eye
Square
Oval
Rectangular
Round





