Custom CP Optical Frame | Safety Goggles Support Customization

A CP optical front with a closed side profile, supplied for workshop and laboratory programmes that treat protection and correction as one purchase.

Overview

CP, or cellulose propionate, is the material behind most value-priced plastic frames, and it earns the position: it moulds cleanly, takes deep colour, and resists the stress cracking that ruins cheaper styrene fronts. This frame is produced from CP granule in a steel mould, so the shape is fixed and the unit cost stays low at volume. The side profile is the difference from the open version: it shields the eye from particles arriving at an angle, which is the case a plain optical front does not cover.

The build targets buyers who need a dependable plastic optical frame at a competitive landed cost: chain stores, pharmacy optical counters, export distributors and promotional programmes. Hinges are chosen per price point, and the frame can be supplied with a plastic spring hinge where the extra flexibility is worth the cost step. Because the front shares tooling with the standard CP model, a buyer can compare the shielded and open versions from the same mould family before committing. Colour is set in the mould rather than sprayed, so a scratch on the rim does not expose a different tone underneath.

Key Features

Product Showcase

Views show the OCP310410 sample and, where noted, a sister model from the same range, so the hinge position and temple profile can be compared before a sample is ordered.

Specifications

The values above come from the current specification sheet for this model. A size marked as fixed by the mould cannot be changed without new tooling, while colour, logo, lens and packing remain adjustable within the stated minimum.

OEM & ODM Customization

Built as a custom cp optical frame with a closed side profile, the same cp optical frame can be supplied as safety goggles for workshop and laboratory supply, and goggles support customization covers lens marking, shield colour and temple print. Because the front tooling is shared, support customization of colour, logo and packing does not require a new mould.

Cost engineering is the core of a CP project. Because the tooling carries the shape, the levers that change price are wall thickness, hinge grade, colour complexity and packaging, not the front design itself. A buyer who can accept an existing shape and change only the colour and logo gets the shortest path from approval to shipment, and the sample confirms those choices quickly.

• Shape: existing moulds can be re-coloured and re-logoed; a new shape requires a dimensioned drawing and a tooling quotation.
• Hinge grade: standard, spring or screw-fixed hinges are quoted separately so the price step is visible before the order is placed.
• Colour: solid, transparent and tinted options are matched to a physical swatch, with per-colour minimums confirmed at quotation stage.
• Logo: hot stamp and silkscreen suit flat temple surfaces, while laser marking gives a finer line on dark colours.
• Packaging: polybag, pouch, hard case and printed sleeve are priced per unit, and mixed packing across colours is possible within one carton.
• Compliance: CE and FDA documentation is issued per model, and the lens specification on the declaration matches the shipment.

Buyers who want the wider picture can review the OEM and ODM optical frames programme, which explains how tooling, sampling and documentation are handled across models.

Manufacturing & Quality Control

Production is organised around four checkpoints, and a frame cannot move to the next stage until the previous one is signed off. The process below is the same for a sample order and for a repeat run.

Inspection records are kept against the model number, so a question raised months after shipment can be traced back to the batch, the operator and the material lot. The full procedure is described under quality control.

Applications

• Chain optical stores needing a low-cost house frame
• Pharmacy and supermarket optical counters
• Export distributors serving price-sensitive markets
• Promotional and seasonal frame programmes
• Safety and protection eyewear ranges where a plastic front is required
• Online sellers testing new shapes before committing to tooling

This CP model is catalogued under custom men optical frame, and buyers building a matched family often combine it with the custom optical frame range for other face shapes.

FAQ

Why can the size not be changed on a CP frame?

The size is set by the steel mould. Changing lens width, bridge or temple length means cutting a new mould, so for this model the size is fixed at the value shown and colour or logo remain the adjustable variables.

What is the minimum order quantity?

MOQ is 1200 pieces for this model. A mixed order across two or three colours is accepted when each colour reaches its own minimum, and the exact split is confirmed at quotation stage.

Which certifications are available?

CE and FDA documentation is issued against the model number, covering the frame material and the lens specification shipped. If your market needs additional testing, the requirement is quoted as a separate item.

Start Your Custom Order

Send the quantity, the colour reference and the logo artwork, and the quotation returns with the hinge option, packing cost and documentation list for your destination market.

Send Your Inquiry

Prefer to compare shapes first? The custom men optical frame page lists the rest of the range.