Aviator
Cat-eye
Square
Oval
Rectangular
Round
Years of industry experience
Designed to Reflect You
Global Eyewear Brands’ First Choice in Manufacturing
Home / All / Custom Optical Frame / Custom Men Optical Frame / OEM Business Square Stainless Steel Full Frame Metal Optical Frames for Men
OEM Business Square Stainless Steel Full Frame Metal Optical Frames for Men
Detail Information
A square stainless steel full-frame optical frame for men, built for business wear and supplied as an OEM programme where size, finish and branding are settled before production.
Overview
This is a square metal frame in a stainless steel full frame construction, with a plate foot set at the temple and a front proportioned for a man who wears the pair from the morning commute to the end of the working day. The square eye shape is deliberately flat across the top brow line, which reads as business rather than fashion and sits comfortably under a cap or a helmet.
The frame is built to take prescription lenses, including myopia powers, so it is supplied as a glazing-ready front rather than a display piece. Stainless steel is used because it holds a thin rim without the memory loss that softer alloys show after a few hundred folds, and because it takes a plating that survives daily handling at the temple and the bridge.
Readsun Optical is a Wenzhou-based eyewear supplier that designs and produces high-end TR90, acetate and metal frames. Its Alibaba wholesale store opened in 2007, the range now runs beyond 1,000 models with weekly updates, and the factory monitors and tests every product at every stage of the production process, from product design and experiment through to technology development.
The business square front is cut from square stainless steel strip, so the stainless steel full frame keeps a thin rim without losing rigidity, and every metal optical frames order can mix sizes because the optical frames for men line shares one temple, one hinge and one plating line.
Key Features
Square Business Front
The eye shape is square with a softened corner, cut so the top brow runs almost flat. That geometry gives the wearer a wider horizontal field than a rounded shape of the same eye size, and it makes the frame read as business rather than casual on a male face.
Stainless Steel Full Frame
The rim is a continuous stainless section rather than a screwed assembly, so there is no joint at the corner to work loose. Stainless holds its temper through repeated folding, which is why the same frame can survive a two-year replacement cycle without the temples going slack.
Plate Foot Temple
The temple ends in a plate foot set, which spreads the load behind the ear instead of concentrating it on a thin wire tip. That detail matters for a wearer who keeps the pair on for eight hours, and it is also the part that carries the branding most visibly.
Size and Branding to Order
Size can be chosen from the sizes available on this front, and the logo is applied to the temple or the demo lens. Because the front is shared across the range, a buyer can build a two-size men’s offer from one approval rather than two sampling rounds.
Product Showcase
The photographs below show this square stainless steel frame from the front, in three-quarter view and at the temple foot, which is where the plate detail and the plating coverage are easiest to judge.
Specifications
| Model No. | Confirmed at quotation stage |
|---|---|
| Category | Custom Men Optical Frame |
| Frame Material | Stainless steel, full frame |
| Lens | Demo lens fitted, myopia ready |
| Size | Can be chosen |
| Color | Customizable on request |
| Customization | OEM / ODM, logo, colour, size and packaging |
| MOQ | Confirmed at quotation stage |
| Certification | CE, FDA |
OEM & ODM Customization
The frame is offered as an OEM metal programme: the front geometry is fixed, and the order is defined by size mix, plating colour and branding. Because the stainless front is shared, a buyer can place a men’s business range and a unisex variant from the same approval, with the differences carried in the finish and the temple marking rather than in a new mould.
- Size mix selected from the sizes available on this front, confirmed at quotation stage against the buyer’s planogram.
- Plating in bright, matte or two-tone finishes, with the colour plaque signed off before the bulk run.
- Logo on the temple foot or the demo lens, positioned so it stays legible when the frame is folded.
- Packaging design on request, including a hard case, a soft pouch and a printed card with the buyer’s barcode.
- Every shipment is guaranteed: if a problem appears within the warranty period, other than damage to vulnerable parts or man-made damage, replacement spare parts are sent for fitting.
- The engineering team designs personalised frames and builds the packaging solution around your listing, with dielines and colour proofs reviewed before printing.
- More than 10 professional sales staff handle inquiries within 24 hours, which keeps a reorder moving even when the first contact is in a different time zone.
Manufacturing & Quality Control
For a stainless frame the failure points are the bridge joint, the hinge rivet and the plating at the temple foot, so those three are inspected on every frame rather than by sample. The front is gauged for symmetry after forming, and the assembled frame is folded on a jig before it reaches packing.
1. Incoming Material Inspection
Stainless steel strip, monel wire, nose pads and demo lenses are inspected against the approved sample on arrival, with strip thickness, wire temper and pad hardness recorded per lot. Plating chemicals are checked against the approved list, and any lot that fails the bend test is rejected before it reaches the press.
2. Stamping, Forming and Assembly
Fronts are stamped, trimmed and tumbled, then formed to the frame curve so the lens groove stays concentric. Bridges are welded or screwed, end pieces are aligned to the temple angle, and hinges are riveted at a controlled torque; every frame is opened and closed on the jig and checked for a flush fold.
3. Plating and Optical Inspection
Frames are polished, degreased and plated in nickel-free or IP finishes, then baked and checked for adhesion, colour and coverage on the inner rim. Demo lenses are seated, the frame is gauged for bridge width, temple length and face form, and the finished surface is inspected under a lamp for pits and scratches.
4. Packing and Outgoing Sampling
Frames are wiped, bagged and packed with the case, cloth and card agreed for the order. The AQL sample is drawn from finished cartons and checked for hinge tension, plating colour and laser or printed logo position, and the carton is verified for barcode, quantity and shipping marks before sealing.
Applications
- Business and corporate supply where a square metal frame is the expected dress code.
- Men’s optical ranges that need one shape across two sizes.
- Prescription houses glazing myopia lenses in volume.
- Duty-free and travel retail counters with a compact men’s offer.
- Uniform and institutional programmes that specify a plain metal frame.
- Private-label brands launching a first metal style without new tooling.
This model is listed with the rest of our men optical frames, and the shared construction is described under custom optical frame.
FAQ
What is the minimum order for this frame?
The minimum is confirmed at quotation stage and depends on the plating colour and the size mix. A single size in one finish is the simplest way to start, and a two-size order is quoted as one programme.
Can the frame be supplied with prescription lenses?
It is supplied as a glazing-ready front with a demo lens, and prescription mounting is arranged either at the buyer’s lab or through us. Myopia powers are the usual first order, and the lens specification is confirmed at quotation stage.
How is the logo applied?
Laser marking on the temple foot is the standard method because it does not add thickness or interrupt the plating. Printing on the demo lens is the alternative for a retail display, and both are proofed at actual size before the run.
Start Your Custom Order
Send the size mix, the plating reference and the logo file, and the quotation will return with the frame, the case and the carton specification.
Related Products
Build Your Private Label Eyewear Collection
- *Name
- *Phone
- *Title
- *Content
Why Choose READSUN as Your Optical Frame Manufacturing Partner
New products annually
Countries Exported Products
International Leading Brands Collaborated
Customer Satisfaction
Testimonials
Trusted by Partners Around the World
Products
Ability
