Designed to Reflect You
Global Eyewear Brands’ First Choice in Manufacturing
Home / All / Custom Clip On Optical Frames / Custom Clip On Optical Frame / TR90 Unisex Clip on Optical Frame with Sunglasses Clip

TR90 Unisex Clip on Optical Frame with Sunglasses Clip

TR90 Unisex Clip on Optical Frame with Sunglasses Clip
TR90 Unisex Clip on Optical Frame with Sunglasses ClipTR90 Unisex Clip on Optical Frame with Sunglasses ClipTR90 Unisex Clip on Optical Frame with Sunglasses ClipTR90 Unisex Clip on Optical Frame with Sunglasses ClipTR90 Unisex Clip on Optical Frame with Sunglasses Clip
New Multi-Function Bevel Cut Clip Magnetic Clip-On Optical Frame
Share
Categories
Custom Clip On Optical Frame
Product Specifications
OTR273229J
Frame Material
TR 90
Colors
Available
Size
55-17-145
Clip-On
0.74mm Polarized Lenses
Download
Download docx
Detail Information

A dual-purpose frame where the clip is an engineered part of the front, not an accessory.

Overview

This model pairs an optical front with a magnetic sun clip, so the same pair serves desk work, driving and daylight without a second frame in the bag. The clip is held by steel inserts set into the brow, which keeps the magnetic pull centred and stops the overlay from shifting when it is flipped down one-handed. Front construction uses TR90, the clip runs a 0.74 mm polarized clip lens as recorded in the product file, and the whole assembly is positioned for buyers who need a compact, high-rotation dual-purpose line rather than a broad frame wall.

What a buyer receives is a frame that has been specified rather than assembled from stock parts: material, temple hardware and colour are fixed at sampling, and the production run repeats that specification. The catalogue lists this model under five search terms: TR90 Unisex Clip, Unisex Clip on, Clip on Optical, with Sunglasses Clip and Optical Frame with. They cover platform, fit and frame family, and all five resolve to model OTR273229J, so a request placed under any of them reaches the same tooling and the same specification sheet.

Key Features

The four points below are the ones buyers usually test on a sample: material behaviour, fit geometry, optical performance and the customisation boundary.

Frame Material and Weight

TR90 is a memory-retention plastic: it bends under pressure and returns to its moulded shape, so a frame survives being sat on, packed loose or handed between staff. Density stays low, which keeps the front balanced on the nose instead of pulling forward, and the surface takes a matte or high-gloss finish without extra lacquer.

Fit, Magnet and Clip Seat

The clip seats on two steel inserts moulded into the brow, so it locates by magnet rather than by a hook that scratches the lens. Pull is concentrated at the brow, which keeps the overlay from swinging when the wearer looks down, and the clip can be removed with one hand.

Optical and Sun Performance

The optical front takes a standard prescription lens, and the clip carries a separate sun lens, so the wearer keeps one correction and changes only the light. Because the clip sits in front of the optical lens, the prescription is not disturbed when the sun layer is added.

Colour and Logo Customisation

Colour is matched to an approved swatch before production, and the logo is applied at a stage that suits the material: moulded in, pad-printed or laser-marked. Minimum order quantity and price breaks are confirmed at quotation stage, because they move with colour count and packing format.

Product Showcase

Photographs below are the approved sample set for model OTR273229J: front, angle, temple detail and colour reference. They are the images used for buyer approval, so a reorder is matched against the same reference.

TR90 Unisex Clip, front view of model OTR273229J TR90 Unisex Clip, three-quarter view of model OTR273229J TR90 Unisex Clip, side profile of model OTR273229J TR90 Unisex Clip, temple and hinge detail of model OTR273229J TR90 Unisex Clip, colourway detail of model OTR273229J TR90 Unisex Clip, lens and rim detail of model OTR273229J

Specifications

Values below come from the product file for this model. Where a field is not fixed in the file, it is marked as confirmable rather than filled with a nominal figure.

Model No.OTR273229J
CategoryCustom Clip On Optical Frame
Frame MaterialTR90 memory plastic
Lens0.74 mm polarized clip lens (product file)
Size55-17-145 (lens-bridge-temple, mm)
ColourColour range available; swatches confirmed at quotation stage
CustomizationCustomizable on request
MOQConfirmed at quotation stage
CertificationConfirmed at quotation stage
PackingPacking configuration confirmed at quotation stage

OEM & ODM Customization

Customisation is handled at the tooling and sampling stage rather than at packing, because colour and geometry decisions made late are the ones that create a mismatch between the approved sample and the bulk. The list below is the working boundary for this model: anything inside it is quoted as a variant, anything outside it is quoted as a new development.

  • Front colour matched to a Pantone or physical swatch before moulding, with a colour chip retained for the reorder.
  • Logo applied by moulding, pad printing or laser marking, depending on where the mark sits and how the material takes ink.
  • Clip lens tint and magnet pull specified as part of the same order, so the front and the sun layer stay a matched pair.
  • Lens specified at order: tint, coating and, where the brief calls for it, blue-light filtering.
  • Temple length and tip curvature adjusted at sampling so the frame fits the target market rather than the sample head.
  • Packing configured to the buyer brief: polybag, pouch, case, carton count and barcode label.

Manufacturing & Quality Control

Production runs through four checkpoints, and each one can stop a batch. The sequence is the same for a trial order and for a repeat run, so a buyer who approves a sample knows which checks the bulk will pass through.

1. Incoming Material Inspection

Every incoming lot is checked for colour, hardness and dimensional consistency against the approved sample. Metal parts are checked for plating thickness at the wear points, and any magnetic components are pull-tested before the batch moves to assembly.

2. Moulding and Frame Assembly

The front is moulded to the approved tool, then trimmed and polished. Temples are assembled to the front at the hinge block, and fold angle is checked against a setting gauge rather than by eye.

3. Surface Finishing and Optical Check

Polishing is followed by a coating stage where the order calls for it. Inspectors check for flow lines, colour drift between front and temple, and any gap at the lens seat before the frame moves to packing.

4. Packing and Pre-Shipment Sampling

Frames are packed to the agreed carton count with a colour and model label on each polybag. A pre-shipment sample is drawn from the finished cartons and checked against the approved sample before the carton is sealed.

The full inspection standard is described on the quality control page, and prototype lead times are set out under rapid prototyping.

Applications

Model OTR273229J is ordered by buyers in the following channels. The list is not exclusive, but it describes where the shape, price point and packing have already been placed.

  • Optical chains adding a dual-purpose line to a prescription wall
  • Travel-retail and airport buyers who need one SKU for indoor and outdoor use
  • Distributors supplying drivers, teachers and outdoor workers
  • Private-label brands building a clip-on story across several fronts
  • Corporate and safety programmes where a single pair covers site and office
  • Online sellers who want a product that explains itself in one photograph

For the wider assortment built on the same specification, see the clip-on frame range.

FAQ

What is the minimum order quantity for this model?

The product file does not fix an MOQ for this model, so the quantity is confirmed at quotation stage against the chosen colour count and packing. Colour and logo customisation is quoted against the same quantity, so a trial order and a repeat order use one price ladder.

How long does sampling take, and what is needed to start?

Sampling starts once the target colour, logo position and lens specification are confirmed. A stock front can usually be shown from existing samples, while a new colour or a new logo needs a made-up sample. The exact sampling window is confirmed at quotation stage, together with the courier cost and the sample charge, which is credited against the bulk order.

Can the logo and packing be customised?

Logo and packing customisation are available; the exact method depends on the surface the mark sits on and is confirmed at quotation stage. Packing follows the approved carton configuration, and a buyer can specify polybag, pouch or case before the run is released. Artwork is checked on a proof before production, so a spelling or position error is caught before the tooling is touched.

Start Your Custom Order

Send the target front shape, the clip lens tint and the colour count, and a quotation with sampling options comes back against this model. If the clip-on format is still open, the clip-on frame range shows the other fronts built on the same magnet standard. Model OTR273229J, MOQ Confirmed at quotation stage, certification Confirmed at quotation stage. Send the brief and the specification sheet comes back with sampling, packing and price breaks.

Send Your Inquiry

Build Your Private Label Eyewear Collection
*Email
*Name
*Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Why Choose READSUN as Your Optical Frame Manufacturing Partner

20+

Years of industry experience

1500+

New products annually

80+

Countries Exported Products

100+

International Leading Brands Collaborated

98%

Customer Satisfaction

Testimonials

Trusted by Partners Around the World